‧ Smart sensor-The body is equipped with 10 smart sensor devices, which will not fall from the table or bedside during use
‧ Deep mites removal-Two sets of UV-C ultraviolet lamps are used. The ultraviolet light can penetrate the mites and eggs, destroy their DNA, and sterilize instantly. Ultraviolet light wavelength reaches 253.7 nm, sterilization rate reaches 99.9%
‧ Three operating modes-automatic mode; handheld mode; bed/quilt mode
‧ Wireless portability-easy to carry to different locations for disinfection of bacteria
‧ Wide range of uses-disinfection of sheets, sofas, seats in the car, any household items, etc.
‧ USB charging-built-in 2400mAh high-capacity battery, after a full charge, the flight time is about 2 hours
Rated input power: 5V/1A (MAX)
Rated output power: 5V/1A
Power: Handheld mode: 2.1W; Auto mode: 3.4W
Ultraviolet wavelength: 253.7 nm
Charging time: about 0.5 hours
Battery capacity: 2400mAh
Product size: 16 x 16 x 5 cm
Product weight: 367 grams
The product contains: multi-purpose intelligent sterilization and mite removal robot x 1, Micro USB charging cable x 1, manual x 1
【Three modes of operation】
Auto mode: Open the cover as showing in the picture below, put your Disinfection sterilization robot on the place where need to be sterilized. Quickly press the switch twice, the Disinfection sterilization robot will walk automatically and sterilize.
Handheld Mode: close your Disinfection sterilization robot with the cover to the lock position. Press the switch one time to lighten the UV-C. Hold the silica gel belt and move the UV-C light close to the sterilizing objects.
On-bed Mede/Under-quilt Mode: long press on the key for 3 seconds to start the machine and the LED lamp will stay light then you can place the product under the quilt and other covers for automatic walking disinfection. If the LED lamp start to blink quickly (which means the Disinfection sterilization robot is at low power, there may be insensitivity on working), please stop it and charge it.
In auto mode there will be breathing LED lamp in front-end of the Disinfection sterilization robot if this light blinks quickly, (which means the Disinfection sterilization robot is at low power, there may be insensitivity on working)
Charging display: the front-end breathing LED lamp is in breathing state when the product is charging. The constant breathing lamp indicates that the product has been fully charged.
Function of emergency charger: connect the Disinfection sterilization robot and your phone which need to be charged by a USB cable, no need to press the switch